What to Do When Your Water Heater Suddenly Stops Working: Advice
What to Do When Your Water Heater Suddenly Stops Working: Advice
Blog Article
Nearly everybody maintains their own individual perception on the subject of How to Troubleshoot and Repair an Electric Water Heater.
Several modern-day residences use an electric water heater for their heating unit, as a result of its convenience as well as convenience of use. However, much like any other electrical devices, troubles may develop with its usage, suddenly. It can be truly frustrating to get up to a cold shower instead of a warm one or having your bath with water that isn't warm sufficient and even too warm. Whatever the situation might be, hot water heater problems can be rather aggravating. Luckily, we've made a list of possible options to your hot water heater issues. There are a number of variables that could create most of these problems, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the main power supply for safety and security. Whatever the problem is, getting it repaired ought to not present too much of a problem if you comply with these steps:
Inspect Your Power Supply:
As fundamental as this may seem, it is extremely needed. Without adequate power, your hot water heater will certainly not function. So the first thing to do when your water suddenly retires is to verify that it isn't a power issue. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, merely transform it on and off once more. Replace any kind of broken or worn-out fuse. Test the appliance with power after these changes to see if it's currently functioning.
Check the Heating Element in the Hot Water Heater:
If it's not a power issue, after that try having a look at your heating element if it is still working. Test each of your burner to make sure the issue isn't with any of them. If any of them is defective, replace that component and after that examine whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water coming out isn't hot enough, you may need to examine the temperature level setups on your upper thermostat. Make certain the breaker is turned off before doing anything. Open the accessibility panel and also press the red switch for temperature level reset above the thermostat. This should assist heat the water. Transform the circuit breaker back on as well as check if the problem has been dealt with.
Call An Expert:
If after changing all faulty parts and also resetting your temperature level, the hot water heater still isn't functioning, you may need to contact an expert plumber for a professional viewpoint. The issue with your heater could be that the cold and hot taps have actually been changed or it may be undersized for the quantity of warm water required in your house. Whatever the situation might be, an expert plumber would assist solve the issue.
Final thought
Water heater troubles are not constantly significant. Most of them are due to minor issues like a blown fuse or worn-out heating element. Changing the damaged components should do the trick. Nevertheless, if you are still not able to address the problem, give a call to your closest plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We had been guided to that write-up about How to Troubleshoot and Repair an Electric Water Heater through a friend on our other web property. Be sure to take the opportunity to promote this blog posting if you enjoyed it. Bless you for your time. Visit us again soon.
Best in emergency plumbing services. Report this page